GSO 384V500AH, Руководство пользователя

Страница: 25 / 28

384V500AH
23
leakage, bumping and breakage, short circuit and so on, such as the bad core and module
which are returned from production:
A. The core and module bad goods storehouse should be set up separately, the
warehouse should be separated by brick wall entity, and should be equipped with fire
fighting equipment and alarm facilities with sufficient variety.
B. After technical and quality determination of the fire risk of the bad core and module,
immediately buried in the sandbox and moved to the outdoor open, to prevent fire, and
subsequent notification of professional qualifications of the disposal of dangerous waste
units. At the same time do a good job of waste procedures.
For general poor performance of the core and module (size, capacity, appearance, etc),
adopt the following measures:
A. after technical and quality judgment is only a general failure of the core and battery:
If the incoming materials are bad, timely notify the purchasing department to return the
goods quickly. If the work is bad, it is determined that it can not be repaired.
After the completion of the waste application, timely notification of professional
qualifications of the disposal unit.
B. for the bad battery in the storage period, it is necessary to do a good job in the battery
insulation protection (to prevent accidental short circuit), as far as possible to restore to
the original factory packaging, to ensure that the battery is safe and good protection.
4.Other requirements
The warehouse manager should check the goods information every day, if it is found
that the storage is not correct, the account is not in conformity, the quality problem is timely
feedback and handled, the work is over or off duty, the fire prevention inspection should be
carried out, and the power supply should be cut off.
Keep safe passage in warehouse, prevent accumulation, ensure personnel safety and
rapid transfer of goods. The planning area in the warehouse should be clearly marked, in
which the material placement area should be classified and stored in sub-cell (to avoid
spreading to the maximum extent when the fire occurs) and clearly marked.
Clean and tidy the warehouse area every day, clean up the dirt and sundries on the
ground in time, and arrange the materials in the warehouse into the designated area to meet
the requirements of neatness, neatness, cleanliness, hygiene and reasonable arrangement.
Follow the "first in, first out" principle to avoid battery performance degradation due to
long-term inventory and accidental occurrence.