GSMK CRYPTOPHONE G10i, Руководство пользователя

Страница: 20 / 35

0
softkey, choose Settings, and use the Navigation Control and Enter but-
ton to change the Calltype to the desired mode. Then leave the Set-
tings page by pressing the softkey labelled “Done”. The icon between
the volume indicator and the delay indicator will switch according to
the chosen Call type to indicate Fast or Robust mode.
Switching the Line Type
Normally, the CryptoPhone uses the V.110 circuit switched data (CSD)
- also called digital data call - bearer type to establish a secure con-
nection. To call to an analog landline or to a CryptoPhone on a satel-
lite network or a network with non-standard data-call configuration
(like most GSM carriers in the USA), you can switch to the V. bearer
mode.
To switch the line type, in the CryptoPhone mode, select the “Menu”
softkey, choose Settings, and use the Navigation Control and Enter but-
ton to change the Line Type to the desired mode. Then leave the Set-
tings page by pressing the softkey labeled Done.
A small desktop phone icon will show up on the CryptoPhone screen if
V. is activated. The call setup with V. takes longer than with V.110,
as the modems need some time to synchronize. Incoming calls are not
affected by the call type settings.