User manual for Q880 R1.0
20
for human contact is minimized during normal operation.
The exposure standard for wireless devices employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/Kg.
Tests for SAR are conducted using standard operating positions accepted by the
FCC with the device transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the device while operating can be well below the
maximum value. This is because the device is designed to operate at multiple power
levels so as to use only the power required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower the power output.
To avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna should be minimized.
Important safety information regarding radio frequency radiation (RF)
exposure:To ensure compliance with RF exposure guidelines the phone must be
installed and operated
with
a
minimum of
15 mm
separation from the
your
body.
Failure to observe these instructions could result in your RF exposure
exceeding the relevant guideline limits.