How to programme the 2G/3G GSM Gate Opener
Once the unit has a
green
LED light it is ready to use. The unit has a caller ID function so
only authorised numbers you store can activate the unit. If caller ID is left OFF anyone
phoning the units number can operate the relays.
Please Note
- We have colour coded the
HASHTAG
and
EQUALS
symbols to make it
easier.
To turn caller ID on send a text message
#
ID
=
ON
#
To turn caller ID off send a text message
#
ID
=
OFF
#
NOTE
- If you do not require authorised users please skip to the next page.
Programming Caller ID
To programme a number to the caller ID (WHL), send this text message code:
#
WHL
=
NUMBER
#
To delete the number send the text message code
#
DEL
=
NUMBER
#
Example
#
WHL
=
07123456789
#
Stores your mobile number (max 200 users).
#
DEL
=
07123456789
#
Deletes your mobile number
If the code is accepted the unit will reply “WHL NUMBER STORED” or “WHL NUMBER
DELETED”
PLEASE NOTE
- You can only send one number at a time. Please send the message and
wait for the text acknowledgement before you attempt to add another
number.
Please ensure that you have credit on the simcard to receive the text acknowledgement. It
may take some time to receive a text acknowledgement depending on how busy your
telephone provider is at the time.
Reset Function
For a quick reset and to clear all numbers there is a built in reset function that can be
triggered by sending the text
#
RESET
#
The unit will remove all WHL numbers stored and return to factory settings
www.gsm-activate.co.uk
- 01273462380 - [email protected]
Page 4
