Page 4 of 8
Model:
MPPT30HV
Operating Instructions
Please read these instructions before use
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
1800W Solar Battery Charger
Maximum Power Point Tracker
MPPT30HV-R5
Panel +
Panel -
B
Battery -
Non Critical Load
To be controled via MPPT’s inbult
Low Voltage Disconnect / Dawn to Dusk /Load Control
Critical Load
Caution : Assess yor own needs of these loads over
the protection of your battery.
Battery -
Load -
Load Wiring Instructions:
All power sources, including
panels and batteries, must
be disconnected or
de-energised before
installing or opening this
product.
For saftey the chassis
must be earthed.
Wiring with MCM option:
Connecting the optional MCM-30 to the MPPT will allow various system parameter displays,
output voltage and alarm settings and enable the programmable dawn to dusk or remote load
control options.
The 9-pin D-Sub connector for the MCM is located at the rear of the unit
For full connection details please refer to MCM Manual.
