Page 3 of 8
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
3400W Solar Battery Charger
Maximum Power Point Tracker
Operating Instructions
Please read these instructions before use
Model:
MPPT60-2
BASIC WIRING OPTIONS:
Permanent Load Connection
(Figure 1):
Simplest wiring option where the
load is permanently connected
and the batteries are not
protected from over discharge.
Wiring With Low Voltage
Disconnect (Figure 2) :
This option protects the
battery from over discharge by
disconnecting the load. The
LVD option disconnects the
load when the battery voltage
drops below 0.85 of nominal
voltage to protect the battery
from damage. The load
reconnects when the battery
voltage exceeds 0.95 of
nominal voltage. This feature
will not trigger during short
transients. LVD load is 60A
continuous or 100A transient.
MPPT60-2-R7
Figure 1.
Figure 2.
Figure 3.
Panel +
Panel -
Battery -
B
Panel +
Panel -
Battery -
B
Load -
Panel +
Panel -
Battery -
B
Load -
