Page 4 of 8
Model:
MPPT10HV
400W Solar Charger
Maximum Power Point Tracker
Operating Instructions
Please read these instructions before use
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
Wiring With Dawn To Dusk Switch:
The DDS option is intended to power up loads during night-time only.
This feature will not trigger during short periods of low light, it is an approximation only to actual ambient
light levels and if precise ambient light levels are required then light sensors must be used.
The maximum DDS load current is 10A continuous or 20A transients.
The DDS is set to approx. “All Night” (actual night duration and up to 15 hours max.).
DDS Set-Up
Blue
MPPT10HV R3
Green
