Page 6 of 8
800W Solar Battery Charger
Booster Maximum Power Point Tracker
Operating Instructions
Please read these instructions before use
Unit 2, 110 Station Road, Seven Hills ,NSW, 2147, Australia
Model:
BMPPT800
Changing Battery Type Setting Procedure
1.
Ensure all the BMPPT wires are disconnected.
2.
Remove 7 front panel screws and the front panel and slide out cover –
see Figure 4
.
3.
Locate connector J4 –
see Figure 4
.
4.
Shift link on J4 to vented position –
see Figure 5
.
5.
Slide back cover and fit in front panel carefully, insuring led fits properly into housing,
and screw back the 7 mounting screws.
•
The above procedure can be repeated to turn back to sealed mode –
see Figure 6
.
Figure 4.
BMPPT800-R2
