GSK GSK983M-H, Руководство пользователя

Страница: 21 / 35

GSK983M-H/M-V Milling CNC System Connection Manual
18 Installation of Z axis 2
nd
reference point in position input signal
from mechanical side
GSK983M control unit has been increased Z axis 2nd reference point in position input signal to confirm
the current position for tool change, so reliability are heightened, and it is well to protect magazine and tools.
GSK983M doesn’t only detect 2nd reference return finish signal from CNC side, it also detects 2nd reference
position from mechanical side when tool change. X48.7 of I/O unit is tool change position input signal (it
means Z axis 2nd reference point in position input signal from mechanical side), it can be modified the PC
parameter N3005.1 to change the logic for the proximity switch that is normal open of close (default of
N3005.1 is 0,for normal open).If type of the proximity switch is normal close, then PC parameter N3005.1
will be changed to 1(it means contrary).
Z axis second reference point
in position input signal
installation scheme
I/O unit
+24V X48.7 0V
Proximity
switch
M8
Proximity switch
4mm thick
Z axis second reference point
in position input signal
connection scheme
Z axis second
reference
position
Note: The above I/O pin X48.6 which is “Z axis 2
nd
reference in position input signal from
mechanical side” definition is defined in terms of PLC of V5.01, the I/O points definition depends on
different PLC version! It should be checked the PLC user manual when connecting.
20