manualshive.com logo in svg

GSi TopDry Autoflow 2000 Series, Руководство по эксплуатации, Страница: 21 / 38

Поделиться
Скачать
GSi TopDry Autoflow 2000 Series Скачать руководство пользователя страница 21

6. Fill System Control Box

PNEG-696

 TopDry Series 2000 Autoflow

21

Fill System Control Box

The fill system control box houses the motor starters for fill system #1, fill system #2 and the aeration fan. 
Switches are located on the front of the fill system control box and an Emergency Stop switch is located 
on the side of the control box.

Fill System #1

This switch is used to start and stop fill system #1 manually. The switch should be left in the “AUTO” 
position for normal dryer operation. If the switch is placed in the “OFF” position fill system #1 will not start 
and will stop if running. If the dryer control power is ON, fill system #1 can be activated by placing the 
switch in the “ON” position. When placed in the “ON” position, fill system #1 will operate continuously.

Fill System #2

This switch is used to start and stop fill system #2 manually. The switch should be left in the “AUTO” 
position for normal dryer operation. If the switch is placed in the “OFF” position fill system #2 will not start 
and will stop if running. If the dryer control power is ON, fill system #2 can be activated by placing the 
switch in the “ON” position. When placed in the “ON” position, fill system #2 will operate continuously.

Aeration Fan

This switch is used to start and stop the aeration fan manually. The switch should be left in the “AUTO” 
position for normal dryer operation. If the switch is placed in the “OFF” position the aeration fan will not 
start and will stop if running. If the dryer control power is ON, the aeration fan can be activated by 
placing the switch in the “ON” position. When placed in the “ON” position, the aeration fan will 
operate continuously.

Emergency Stop Switch

This switch will stop the dryer when pushed and should be used in case of emergency.

Содержание TopDry Autoflow 2000 Series







































Отзывы:

Нет отзывов