4
PNEG-2174
Sampler - Model GRA
1. Introduction
This manual covers the installation and operation for the Sampler GRA Model. This manual provides
guidelines for installing the product. You must retain a qualified contractor to provide on-site expertise.
INTERSYSTEMS IS NOT RESPONSIBLE FOR THE INSTALLATION OF THIS PRODUCT.
InterSystems reserves the right to improve its product whenever possible and practical to do so. We
reserve the right to change, improve and modify products at any time without obligation to make changes,
improvements and modifications on equipment sold previously.
General Safety Statements
1. The Sampler system is designed and manufactured with operator safety in mind. However, residual
hazards remain due to the nature of material handling, and specific material hazards. Use extreme
caution at all times.
2. Modifications to equipment may cause extremely dangerous situations that could result in damage
to the equipment as well as serious injury or death. Never modify the equipment.
3. Intersystems recommends that you contact the local power company to have a representative survey
the installation to ensure wiring is compatible with their system and adequate power is supplied to
the unit.
4. Consult InterSystems before making any changes to the sampler or its operating environment.
Careless changes could result in death or serious injury to people and reduce the performance and
service life of the equipment.
5. Never perform any service on this equipment or any powered equipment until all power has been
shut off and locked out so that it cannot be restored without the consent and knowledge of the person
who interrupted power. Power includes electrical, fluid, mechanical or pneumatic energy.
6. Never perform any service on this equipment without utilizing the required PPE (Personal Protective
Equipment). Refer to the MSDS (s) (Material Safety Data Sheet (s)), on all the products to which this
equipment is in contact to determine what PPE is required.
Scope
The certified drawings list the non-standard components that have been incorporated into the equipment.
InterSystems, Inc. normally stocks non-fabricated parts and non-custom OEM parts. Replacement parts
for any other components, including fabricated parts and custom OEM components can be supplied
upon request.
This equipment is to be operated only on the voltage designated on the certified
electrical drawings. Fire or explosion may result, which can cause death, serious
injury and extensive damage to equipment. Do not connect to voltages other than
designated.
Compressed air can cause severe injury. Shut off and lock out compressed air
source to the sampler and bleed off any and all present compressed air within the
sampler pneumatics before attempting any service on this sampler.
