Section 1 - Connect the Modem
Your computer must be turned off in order to connect
the modem.
The back of the modem ports are color coded for easy
connectivity.
1.
•
Attach the Wireless Antenna.
2.
•
Plug in your DSL line. (cable included)
3.
•
Plug one end of your yellow coated LAN cable into
one of the yellow LAN ports, and the other end into
your computer’s NIC port.
4.
•
Plug in the power cord.
5.
•
Turn the modem on using the On/Off switch. When
the ADSL light stops flashing turn on your
computer.
1. Ensure that the modem and all of the cables are
connected to your computer/notebook, and the
modem is turned on.
2. Verify the modem’s ADSL light is solid green.
3. Open an Internet browser (ex: Internet Explorer).
If your default browser homepage is blank, please
type a valid URL (ex:www.MyGSInet.net) to activate
the Easy Sign On.
4. Wait while the DSL configuration is made.
5. Highlight the
PPPoE
option and input your GSInet
user name and password, then click the
Apply
button
to apply these settings.
6. Wait approximately 1 minute for the modem to
configure and you see the congratulation screen
below.
If you have any questions at any time during modem
setup, please contact GSInet Technical Support at
1-888-896-7824.
Section 2 - Run Easy Sign On
TM
7. Congratulations! You are now connected to the
Internet. Open a new browser to begin browsing the
Web, or proceed to Section 3, Setup the Wireless,
to configure the wireless capabilities of your modem.
