D-0100778 Rev C
25
Chapter 3: Connectors, Controls and Indicators
Rear Panel
The connectors on the rear panel of the GSI AudioStar Pro are shown in the
following diagram. The label and jacks are visible by turning the instrument
around on a flat, stable surface.
R1
R3
R6 R7
R8
R11
R13
R16
R2
R4
R5
R9 R10 R12 R14 R15
Connection
Description
Graphic
R1
Mains Power Input
IEC 14
R2
USB Computer
Connection
USB B style connector
R3
LAN Connections
Ethernet Connection RJ45
Currently not supported
R4
USB Connectors
USB
A style plug
R5
External Monitor Output
HDMI
Video only signals, no audio, 600 x 800
resolution
R6
FF Speaker DIN
Connection Output
SFS - Sound Field Speaker
5 pin DIN connector
Provides
connection between the internal
amplifier to left and right loudspeakers within a
sound room
NOTE:
Free Field Speaker Outputs 1 and 2 are
25 Watts per channel into 8 ohm.
R7
R7
FF Speaker RCA
Connections Output
FF Speaker RCA
4 RCA jacks
Optionally connect to 4 speakers through an
external amplifier using jacks 1 -4
(contact a
GSI Representative for more information)
NOTE:
Free Field Line Outputs 1 and 2 are 5
VRMS into a 2000 ohm load.
NOTE:
Cannot use internally amplified