GSI Group 890-00584, Руководство по установке и настройке

Страница: 39 / 120

6
System Configuration
Topics Covered in this Chapter
▪ Activating the Screen Automatic Scroll on the Main Page
▪ Adjusting the Backlight Settings
▪ Arming and Disarming Your Premises Automatically
▪ Configuring and Managing Modules
▪ Configuring and Monitoring Ethernet Data
▪ Configuring Phone Settings for the Call Out Sequence
▪ Configuring Programmable Outputs
▪ Configuring Remote Listening
▪ Configuring Technical Phone Line Settings
▪ Recording the System Name
▪ Setting the System Trouble Recognition and Recovery Times
▪ Viewing and Resetting Output Circuits
Activating the Screen Automatic Scroll on the Main Page
The screen can scroll automatically at preset intervals to move from one page to the other when the zone
tiles are displayed on more than one page on the main page.
What You Should Know
NOTE: More than one page of zone tiles must be available for the screen to scroll.
1. Click on Menu→System→Settings→General settings .
2. In edit mode, under the General tab, check the Auto scroll zone screen button.
3. Set the time interval at which the screen scrolls from page to page on the main page.
Adjusting the Backlight Settings
1. Click on Menu→System→Settings→Status and ID .
2. In edit mode, under the General tab, either select the Use auto backlight adjust or enter a backlight
percentage next to the Backlight button.
Arming and Disarming Your Premises Automatically
The intrusion zones on sites that operate during regular hours and rarely go beyond set times can be con-
figured to arm and disarm automatically at set times during the week and during the weekend.
1. Click on Menu→System→Settings→Intrusion arming .
2. Select Use force arming if you want the system to automatically arm itself when a zone is in an alert
or trouble state.
895-00677 Agri Alert 128 Touch 39