GSI Group 890-00584, Руководство по установке и настройке

Страница: 31 / 120

4
Basic Operations
Topics Covered in this Chapter
▪ Acknowledging an Alert On-site or on the Phone
▪ Arming and Disarming Intruder Zones
▪ Bypassing a Zone
▪ Deleting Groups of Information
▪ Filtering Zones on the Main Page
▪ Logging In
▪ Selecting the Language Displayed on the User Interface
▪ Selecting the Temperature Scale
▪ Setting the Date and Time Parameters
▪ Switching Into Edit Mode
▪ Viewing Alert History
▪ Viewing System Diagnostics
Acknowledging an Alert On-site or on the Phone
As soon as an alert is set off, the screen displays a popup prompting you to acknowledge the alert. If
nobody is on site to acknowledge the alert, the dial out sequence begins after the set amount of time.
Acknowledging the alarm puts a stop to the notification process and you can take action to get the zone
back into a normal condition.
• When on-site, proceed as follows:
1. Either from a module with a keypad connected to the system or on the system’s user interface,
enter your password when prompted.
2. Find the source of the problem and take action to return the zone into a normal state.
• When notified by phone, text, or e-mail, proceed as follows:
1. Enter your four digit password when asked by the system.
2. Contact someone on-site or take action to return the zone into a normal state.
NOTE: If you miss an alert call from the system, you can call the system and follow the instruc-
tions to acknowledge the alert.
Arming and Disarming Intruder Zones
1. From the main screen, click on the drop down menu button.
2. Click on the arm or disarm button.
The intrusion zones that are in a trouble or alert state are displayed. Intrusion zones must be in a
normal state to be armed.
3. Enter your four digit pin number using the keypad on the right hand side.
895-00677 Agri Alert 128 Touch 31