GSI Group 890-00584, Руководство по установке и настройке

Страница: 111 / 120

G
Safety Characteristics and
Certification
This controller is Safety Class I according to IEC classification and has been designed to meet the require-
ments of UL 61010-1 third edition and CAN/CSA-C22.2 nº 61010-1 third edition (Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use). It is an Installation Category II
intended for operation from a normal single phase supply.
This controller has been tested in accordance with IEC61010-1 and has been supplied in a safe condition.
This instruction manual contains some information and warnings which have to be followed by the user to
ensure safe operation and to retain the instrument in a safe condition.
Emission standards
This controller has been designed to meet the requirements of the EMC Directive 2004/108/EC. The com-
pliance was demonstrated by meeting the test limits of the following standards:
Test number Test name
Standard Standard level
1 Conducted emissions CISPR 11 : 2009 A1
(2010) FCC part 15,
under part B : 2012 Group 1, class A Class A
2 Radiated emissions CISPR 11 : 2009 A1
(2010) FCC part 15,
under part B : 2012 Group 1, class A Class A
3 Harmonic current
emissions IEC61000-3-2: 2006 A1
(2009) A2 (2009) Class A
4 Flickers limitation IEC61000-3-3: 2008
≤4% on the main sector
voltage envelope
Immunity standards
EN61326-1 (2013) EMC product standard for Electrical Equipment for Measurement, Control and Labora-
tory Use and FCC part 15. Test methods, limits and performance achieved are shown below (requirement
shown in brackets):
Test
number Test name Standard Standard level
5 Radiated, radio-fre-
quency, electromagnetic
field immunity test EN61000-4-3 :
2006 A1 : 2007 A2
: 2010 80% AM at 1kHz, 10V/m, 80MHz – 1GHz: Perform-
ance: A (A) 80% AM at 1kHz, 3V/m, 2GHz to
2.7GHz:
6 Immunity to conducted
disturbances, induced by
radio-frequency fields EN61000-4-6 :
2008 150kHz-80MHz : 3Vrms + 1kHz 80% AM (AC line,
Earth, I/O connections >3m)
7 Electrostatic discharge
immunity test EN61000-4-2 :
2008 ± 8 kV air ± 4 kV contact Performance A (B)
8 Electrical fast transient/
burst immunity test EN 61000-4-4 :
2012 ±2kV/5kHz on the main sector ±1kV/5kHz on the I/
O >3m Performance A (B)
895-00677 Agri Alert 128 Touch 111