EN
8 |
www.garsaco.com
11. The manufacturer is
not responsible in any
case for the assembly,
installation or commis-
sioning of any electrical
component that has
been inserted or mani-
pulated in places other
than its own facilities.
HOW TO USE
1. The lamp should only operate underwater while
secured to the vertical walls of the pool. Never
switch on the lamp if it is not underwater.
2. It does not include the controller, it is necessary to
acquire the command with ref.: 000704747.
3. f the light is powered off for more than 20
seconds, it will keep the latest program when it is
turned on again.(Memory Function)
4. To achieve synchronization, confirm all lamps are
installed correctly on the same switch, after they are
powered off for more than 20 seconds, switch on
and switch off continuously 3 times, and then finally
turn them on again. They will all go to program 1.
Now you can select a program for them by switch off
and on within 3 seconds .(Re-set Function)
RECOMMENDATIONS
1. To avoid dazzling, projectors directly away from
the house of habitual viewing of the swimming pool,
are installed.
2. If the light is used in competition or training pool
the projectors should be installed at sides in order to
avoid dazzing swimmers during evening training.
3. Bearing in mind the possiblility of having to
change a bulb, the porjector should be installed in an
accessible place, either from the upper edge of the
pool or from the lower part of same. We recommend
installation on the opper part in order to avoid empt-
ying the pool when having to charge the bulb.
4. The excess cable can be wound on the inside of
the projector.
5. The projector does not need maintenance, so it is
not necessary to leave the two meters of cable at the
beginning of the installation to remove the projector
without needing replacement.
