10)
Radio Control with antenna (control
included in your kit may differ from that
shown in photo). The radio control is used
to drive the buggy and control the various
functions (brake, etc.). The radio control
unit also contains several knobs and
switches, which are used to adjust the
servo units in the buggy.
11)
Power Start Unit with driveshaft (drill start
kits only). The Power Start is a hand held
unit which is used to start the engine.
The shaf is inserted into the coupler in the
rear of the engine and when powered,
turns the engine over until it starts
(much like the starters in F1 or Indy
cars).
12)
Radio Instruction Manual. This
manual contains the detailed info for
the various functions of the radio.
B:
Remove the body from the Storm CL-1 Pro RTR by removing the 2 body clips and
gently pulling the body away from the buggy. Check the buggy over for loose
screws and linkages. Also check the wheel nuts to ensure they are tight. Nitro
vehicles produce a high amount of vibration, and even through shipping, screws
can come loose. If you find any loose screws, tighten them now. Due to pressure
variances during shipping, some oil may leak out of the diffs and shocks. This is
normal, and in no way harmful to the performance of the buggy. If you find any
leaks, simply wipe them clean with a rag.
Step By Step from A to Z
8
