Gryphon Sonata-Allegro, Руководство пользователя

Страница: 12 / 32

tem. The Menu may be activat-
ed either via the remote control
or via the front panel controls.
To access the Menu, press both
Volume controls (Up and Down)
at the same time. MENU will
appear in the display.
Press Input Up or Down to go to
any of the menu-controlled
functions listed in the chart.
NOTE: If you go to Save for
more than a few second, all
new settings will be stored in
memory and the preamplifier
will exit the Menu. If you are not
finished, activate the Menu
again and continue. If you go to
QUIT for more than one sec-
ond, the preamplifier will exit the
Menu with no new settings
stored in memory. If you acci-
dentally Quit the Menu, activate
the Menu again and start over.
When you have made the nec-
essary changes for a function,
press Input Up or Down to go to
the next function which you
wish to change. When all func-
tions have been correctly
adjusted, press Input Up or
Down until Save appears in the
display. After a few seconds, all
new Menu settings will be
stored in memory and the
Gryphon Sonata will exit the
Menu. If you decide that you do
not wish to make any changes
while in the Menu, go to Quit.
After a few seconds, the pream-
plifier will exit the Menu. No
changes will be stored in mem-
ory. Your personalized, custom
settings may be recorded below
for future reference.
Menu Function
Default Setting Custom
Setting
1. Channel Balance
B A L 00
2. Maximum Level
L m a x 44
3. Start-up Level
L o n 10
4. Level Match Input 1
C H 1 # 00
5. Level Match Input 2
C H 2 # 00
6. Level Match Input 3
C H 3 # 00
7. Level Match Input 4
C H 4 # 00
8. Level Match Tape In
T A # 00
9.Level match Riaa in
RIA# 00
10. Green Bias
G R . B Low
11
.
Display On/Off
D I S P ON
12. Save changes, Exit Menu
S A V E
12