Technical
Specifications
(Balanced operation)
Signal to Noise ratio:
MM 86 dB Unweighted Ref. 10
mV
MM 90 dB A weighted Ref. 10
mV
MC 68 dB Unweighted Ref. 0.5
mV
MC 72 dB A weighted Ref. 0.5
mV
Gain MC: 68 dB
Gain MM: 38 dB
RIAA tracking: +/- 0.1 dB 20 -
20 kHz
THD: 0.01%
Output impedance: 50 Ohms
Input overload margin:
MC 30 mV pp
MM
700 mV pp
RIAA out: voltage sving 60 V pp
15
MC Impedance
Selector
Turn off power before removing
cabinet top plate.
The impedance selector is a
super high grade socket using
removeable gold-plated jumpers
to secure lasting superior con-
tact. The selector has 6 positions
marked on the circuit board.
Position 1
10 Ohm
Position 2
40 Ohm
Position 3
80 Ohm
Position 4
300 Ohm
Position 5
800 Ohm
Position 6
47 kOhm
See figure 3
Custom Loads
Besides these values it is possi-
ble to load the cartridge with any
impedance between 10 Ohm
and 47 kOhm, by inserting resis-
tors in the sockets found on the
PC board just left of the imped-
ance loading socket (as seen
from the rear) RIN 1/RIN 2.
See fig. 4
Fig. 4
Use only high quality, precision
resistors.
Fig. 3
