GRUNDIUM OCUS MGU-00001, Руководство пользователя

Страница: 36 / 40

Ocus® User Guide version 9.0
35
Hermiankatu 6-8G, 33720 Tampere, Finland
©2021 Grundium. All rights reserved.
22 MOVING THE SCANNER TO ANOTHER LOCATION
Note: Ocus scanner is a delicate instrument and not designed to withstand by itself stress from transportation –
careful packing is required.
When you hand-carry the scanner to another location, do the following:
1. Switch off the scanner and detach the cables
2. Turn the focus knob until the camera lens is in the uppermost position
3. Insert the transportation support pin
Image 38 Insert transportation support pin by turning it clockwise.
4. Place the scanner into carrying case, close the lid and secure it by locking latches.
If you need to send the scanner to another location, do the following:
1. Switch off the scanner and detach the cables
2. Turn the focus knob until the camera lens is in the uppermost position
3. Insert the transportation support pin (
Image 38
)
4. Place the scanner into carrying case, close the lid and secure it by locking latches.
5. Pack the carrying case into cardboard box and place at least 10 cm soft filling at each side of the carrying
case.
Tip: Store the original Ocus cardboard box and foam inserts – use them for packing your Ocus safely.
6. Tape the cardboard box securely, so it does not open during the transit.
Note: Always verify the operation and performance of the scanner after transportation.