ENGLISH
21
PROGRAMMING THE REMOTE CONTROL
___________________________
Programming function levels
1
Move the slide-switch to the function level (SAT, VCR, DVD) you want to
programme.
– The display of the selected function level lights up for about three seconds.
2
Simultaneously press »
AUX
« and »
3
« until the display of the selected func-
tion level lights continuously.
3
Point both remote controls at each other at a distance of about five centi-
meters.
4
Press the button on the TP 850 C which is supposed to be programmed.
The display of the selected function level flashes once.
5
Press the function button which is supposed to be learned on the original
remote control until the display of the selected function level on the TP 850
flashes twice.
Note:
If the function could not be learned, all four displays on the TP 850 will flash
twice. In this case, repeat steps
3
to
5
.
6
To finish the settings, simultaneously press »
AUX
« and »
3
«.
The display flashes twice.
VTR
DVD
LP
000
SV
V=
TV
SAT
VCR
DVD
3
1
2
4
5
6
7
8
9
0
5
cm
