Grundig WKC 5201 RDS, Руководство по эксплуатации

Страница: 21 / 31

ķ
20
4
Autom. LEARN (radio mode)
If you are in a reception area in which
reception of RDS programmes with traffic
announcements is poor, you can disable
the "Autom. LEARN (LRN) in radio mode"
function.
"
LRN ON
": autom. LEARN
"
LRN OFF
": no autom. LEARN for volume set-
tings greater than "
VOL 4
".
5
Autom. change of regional programme
If an RDS programme consists of various
regional programmes, it may occur that
your car radio changes between regional
stations when changing the reception area.
"
REG ON
" autom. change of regional
programme is possible.
"
REG OFF
" no change of regional
programme is possible.
6
Switching on and off with the
ignition/start switch
"
IGN ON
" It is possible to switch the radio on
and off with the ignition/start
switch of the vehicle.
"
IGN OFF
" Switching on and off is only possi-
ble with the
“ IO
POWER
button.
7
CD or AUX input sensitivity
Adapting a CD changer of an AUX audio
programme source.
"
MCD LOW
" low
"
MCD MID
" median
"
MCD HIGH
" high (e.g. MCD 30)
8
Volume limitation when switching on
"
ON VOL - -
": no limitation or
"
ON VOL 20
": max. volume, e.g. 20
(- - … 40).
The volume is limited only if the volume
when the car radio is switched off is
greater than the set value!
9
Minimum volume for traffic
announcements
"
TA VOL 16
" (10 … 40)
You hear the set volume while making the
setting.
ßI
Speed-controlled volume
"SCVOL 124" (- - … 144)
Setting is only possible if a speed-control-
led signal is present on the SCV connection
(A1).
"
SCVOL - -
" : SCV switched off.
"
SCVOL 144
" : maximum effect.
Setting
1. Car standing still, motor running:
set desired volume with ¢ ¢ rotary knob.
2. Prepare EXPERT setting:
press the
“
LOUD
EXPERT
button until signal
sounds.
Turn
¢ ¢ rotary knob until e.g.
"
SCVOL ...
" appears in the display.
Briefly press the
“
LOUD
EXPERT
button:
»
E
« appears in the display.
3. At higher speed:
use the
¢ ¢
rotary knob to set the required
volume, e.g."
SCVOL 124
" in display.
Press the
“ LOUD
EXPERT
button until the signal
sounds.
í
For reasons of safety the following
setting should be carried out by the
passenger!
EXPERT