Grundig WK 4260 Скачать руководство пользователя страница 7

15

ENGLISH

Preparation

1  

Remove all packaging and sticker materials 

and dispose of them according to the applica-

ble legal regulations.

2  

Before using the appliance for the first time, 

clean all parts which come into contact with 

water carefully. (See the “Cleaning and care” 

section).

3  

Completely roll out the power cord from the 

power cord storage 

G

 on the bottom of the 

base. Pass the power cord through the slot on 

the base.

4  

Clean kettle well before initial use and dis-

card water of first two boiling cycles.

Operation

1  

Push the lid release 

B

 back to open the  

lid 

A

.

― The lid 

A

 opens automatically.

2  

Fill the water tank 

H

 with water.

Notes

7

7

Do not place the water tank 

H

 on the base 

while filling it with water.

7

7

Never fill the water tank 

H

 above the maxi-

mum level indicator or below the minimum 

level indicator.

3  

Close the lid 

A

 until it clicks into place.

4  

Place the water tank 

H

 on the base. Make 

sure that it is sitting in an upright and stable 

position.

5  

Insert the plug into the wall socket.

6  

Press down On/Off switch 

E

 to >>I<< posi-

tion.

―  On/Off switch indicator 

F

 lights up blue 

inside and boiling process begins.

Note

7

7

Lid 

A

 should always be closed during the 

boiling process; otherwise the kettle will not 

switch off automatically.

7  

After a few minutes, the water will start to boil. 

The kettle switches off automatically.

― On/Off switch 

E

 moves upwards to „0“ 

position and the blue light goes off.

Note

7

7

If you want to stop the heating, push the On/

Off switch 

E

 to „0“ position.

8  

Disconnect the plug from the wall socket.

9  

Take the water tank 

H

 from the base. Only 

hold it by the handle 

C

.

Caution

7

7

Do not open the lid 

A

 as hot water could 

splash out. Make sure that no water splashes 

onto the base.

10  

 Pour the water from the spout 

J

 to the cup 

or glass you want to use.

Notes

7

7

If you want to continue the heating process, 

repeat the procedure from 1 to 10.

7

7

Let the kettle cool down between each heat-

ing process.

Hints and Tips

7

7

The kettle is equipped with a filter 

I

 which 

filters out limestone and other residues when 

the water is being poured out.

7

7

Use softened or filtered water to prevent lime 

build-up. 

OPERATION _________________________________

Содержание WK 4260











Отзывы: