EN
GLISH
7
Connecting the antenna and the mains cable
1
Plug the cable of the rooftop or indoor antenna (passive or
active indoor antenna with its own power supply for digital tele-
vision stations) into the antenna socket »
ANT-IN
« on the tele -
vision set
or
Plug the rooftop antenna cable (for analogue television stations)
into the »
ANT-IN
« socket on the television.
Note:
When connecting an indoor antenna you may have to try it out
at different positions until you get the best reception.
2
Plug the mains cable supplied into the »
AC-IN
« mains socket of
the television.
3
Plug the mains cable into the wall socket.
Note:
As well as the 230V mains supply, you can also operate the te-
levision with a standard 12V power supply unit (4 amps). Con-
nect the power supply unit into the »
DC-IN
« socket and the wall
socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Only connect the television using the power cord supplied to a
suitable earthed safety socket.
Do not use an adapter plug or extension lead which does not
meet the applicable safety standards. Do not tamper with the
power cord.
CONNECTION/PREPARATION
----------------------
2
1
3
