Grundig UC 5620, Руководство пользователя

Страница: 16 / 56

16­
ENGLISH
Before­first­use
7
Remove the transparent protection sleeve on
the power button
D
panel before using the
appliance for the first time.
Cleaning­sensitive­and­small­objects
1
Open translucent lid
A
and fill the stainless steel
tank
B
with water.
Caution­­
7
Do not exceed the “MAX” marking.
7
Do not operate the appliance without filling with
water, otherwise it will get damaged.
7
Use only clear, cold water.
2­
Put the object in the plastic cleaning basket
H
.
3­
Place the plastic cleaning basket
H
into the
stainless steel tank B .
4­
Close the translucent lid
A
.
5­
Plug the power cord
F
into a suitable power
outlet.
– Power on indicator light
C illuminates for a
few seconds and disappears.
6­
Press the power button D .
– The power on indicator light C illuminates and
the cleaning operation starts. It takes 5 minutes
for the appliance to finish cleaning operation.
7­
When the cleaning operation finishes, the
appliance automatically stops and the power on
indicator light
C disappears.
8­
After using the appliance, disconnect the power
cord
F
from the power outlet.
9­
Open the translucent lid A and take out the
plastic cleaning basket
H
with the object. Pour
out the water and clean the appliance. See the
“Cleaning and care” section.
Notes
7
You can put multiple of jewelries at the same time.
7
Put the glasses in the plastic cleaning basket
H
always with the glasses in upward position.
7
Plastic cleaning basket
H
absorbs one third of
the ultrasonic energy and decreases the cleaning
power. So it might be necessary to repeat the
cleaning operation more than once.
7
Be sure that the water level does not exceed the
“MAX” marking after placing the objects into the
Stainless steel tank
B . If the “MAX” marking is
exceeded, take an object out until the water level
again matches with the “MAX” marking.
7
The object should be immersed well into the
water.
7
Do not press power button D while power on
indicator light
C
illuminates for a few seconds.
Press it after the light disappears.
7
The appliance has an integrated timer for 5
minutes of operation.
7
If you want to stop the cleaning operation earlier
than 5 minutes, press the Power button D .
Cleaning­metal­bracelets­of­
waterproof­watches
1­
Open translucent lid
A
and fill the stainless steel
tank B with water.
Caution­­
7
Make sure that the watch is waterproof and
suitable for cleaning in the Ultrasonic Cleaner.
7
Do not exceed the “MAX” marking.
7
Do not operate the appliance without filling with
water, otherwise it will get damaged.
7
Use only clear, cold water.
2­
Place the watch onto the plastic watch holder
G
in the plastic cleaning basket
H
.
OPERATION ________________________________