1 8
Set does not react to operation of any button
– Electrostatic discharge
• Switch Off the set, disconnect the mains plug,
reconnect after a few seconds
– LOCK switch is activated
• Switch Off the LOCK switch
TROUBLESHOOTING GUIDE
Malfunctioning and losing time settings and
preset radio stations
– Continued operation with weak batteries
• 1. Remove the batteries
2. Press a paper clip through the RESET hole
3. Insert fresh batteries
4. Readjust the time settings and preset radio stations
Advice: Set the LOCK switch to ON when packing the
set or putting it away
This unit complies with the radio interference requirements as
laid down in EC (European Community), USA’s FCC regula-
tions and UDC/CSA standards.
The type plate is located on the back of the set.
