Grundig TR 2200 DAB Plus, Руководство пользователя

Страница: 11 / 15

23­ ­ ENGLISH
OPERATION
------------------------------------------------------------------------------------------------------------------------------
FM­mode
For the best FM reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting­the­input­source­FM
1 Select the input source FM with » Mode/
Alarm «.
– Display: »
FM Mode
«, then the frequency of
a FM radio station.
Selecting­stored­stations
1
Select the station you want using the preset but-
tons »
1
« to »
5
« (presets 1 to 5) or using »
+­5
«
and the preset buttons »
1
« to »
5
« (presets 6 to
10).
Displaying­RDS­station­informations
RDS (Radio Data System) is an information sys-
tem which is transmitted additionally by most FM
stations.
Notes:­
7
It may take some time before all RDS infor-
mation is available.
7
GRUNDIG has no influence on the correct-
ness of such information.
1 Press » Select/i « repeatedly.
– The following display appears in succesion:
The name of the radio station, radio text (if
offered), station type (PTY), the current time
and date.
Listening­to­an­external­source
1 Use a standard audio cable to connect » AUX­
IN
« on the back of the device to an AUDIO
OUT socket on the external equipment.
2
Press »
ON/OFF
« to switch on the device.
3 Select the input source for the external device
with » Mode/Alarm «.
– Display: »
AUX IN Mode
«.
4 Adjust the volume using » –­­+ «.
5 Start playback on the external device.
Note:­
7
If no audio signal is available on socket
»
AUX­ IN
«, the device switches automati-
cally to Stand-by mode after 15 minutes. For
further use switch on the device again.