Grundig SONOCLOCK 600, Инструкция по эксплуатации

Страница: 12 / 59

­ 12 ENGLISH
3 Select the preset with » « or
» PRESET– «.
4 Press » SET/TIME « to save the station.
Note:
7
If stations are already stored on the
presets, they are overwritten when
new stations are stored.
5 To store more stations, repeat steps 1 to
4 .
Selecting­stored­stations
1
Select the preset with » « or
» PRESET– «.
Adjusting­the­volume
1 Adjust the volume with » –­ «.
Setting­the­brightness­of­the­
display
1 In Stand-by adjust the brightness in two
levels with » DIMMER­HI/LOW «.
RADIO­MODE
­--------------------------------------------------------------------------------------------------------------
Antenna
For the best FM (UHF) reception it is
suffcient to align the wire antenna accor-
dingly.
Switching­on/off
1 Switch the device from standby with
» ON/OFF «.
2 Switch the device to standby with
»
ON/OFF
«.
Searching­for­and­saving­ra-
dio­stations­–­automatically
You can store 10 radio stations on pre-
sets.
1 Activate the station search by pressing
»
TUN+/HR
« or »
TUN–/MIN
« until the
frequency display changes to rapid
runthrough.
– The search stops when a station is
found.
Note:
7
To move the frequency forward in
steps, briefly press »
TUN+/HR « or
» TUN–/MIN « several times.
The frequency changes in steps of
50 kHz, 100 kHz are shown; at 50
kHz the last digit of the particular
frequency indicator flashes briefly.
2
Press »
SET/TIME
« to activate the mem-
ory function.