Grundig Sonoclock 590, Руководство пользователя

Страница: 9 / 13

ENGLISH ­19
– Display: the »
AL­1
« or »
AL­2
«
LED glows;
or
activate both alarm times by plac-
ing the »
AL­1­1+2­2
« sliding in
the » 1+2 « position.
– Display: the »
AL­1
« and »
AL­2
«
LEDs glow.
Displaying­the­alarm­times
Depending on the setting (»
AL­1
« or
»
AL­2
«) either alarm time 1 or alarm
time 2 is displayed.
1
Press »
ALARM
« and hold it
down.
– Display: the last alarm time set.
2
Release »
ALARM
« to end the dis-
play of the alarm time.
– Display: the current time.
Note:
7
If the »
AL­ 1­ 1+2­ 2
« sliding
switch is set to »
1+2
«, the alarm
times cannot be displayed.
OPERATION
­_____________________________________
Switching­on­and­off
1 Press » RADIO­ON « to switch on
the device.
2
Press »
­
« to switch off (stand-by)
the device.
Radio­operation
For the best FM (VHF) reception, it is
sufficient to direct the wire antenna
accordingly.
Tuning­radio­stations
1
Set the frequency band with
» FM­­­MW «.
2
Find and tune the station using
» -­ «.
Adjusting­the­volume
1 Adjust the volume using
»
+­VOLUME­-
«.
Automatic­dimmer
Your device is equipped with an au-
tomatically adjusts for the brightness
of the display.
Alarm­mode
Selecting­the­alarm­times
The alarm stand-by (» « or » «)
must be activated.
1
Push the »
AL­ 1­ 1+2­ 2
« sliding
switch to » 1 « or » 2 «.