Grundig SM 3630, Инструкция по эксплуатации

Страница: 18 / 65

18 ENGLISH
Preparation
Caution­
█
Switch off the appliance and disconnect from
supply before changing accessories or ap-
proaching parts that move in use.
1­­
Remove all packaging and sticker materials
and dispose of them according to the appli-
cable legal regulations.
2­­ Take the entire unit of the motor housing
C
and place it on a level surface, e.g. on the
kitchen counter.
Caution­
█
The blade unit is very sharp! Handle the
blade unit with utmost care, especially during
cleaning, in order to avoid injuries.
3­­
Clean all parts, with the exception of the
motor housing
C
as described in “Cleaning
and Care”.
4­­ Then re-assemble the jug blender in the re-
verse order.
5­­ Insert the chopping blade
B
unit onto the jug
A by rotating it clockwise. You can see the
“lock” arrow direction at the bottom of the
chopping blade
B
unit.
6­­
Place the jug A onto the motor housing
C
. Lock the jug A clockwise according to the
“lock” arrow on the motor housing
C
.
7­­ To release the jug A , turn it to anti-clockwise
direction.
Lock Unlock
Note
█
Make sure that the notches on the bottom of
the jug A fit those in the motor housing
C
.
8­­
Before using the appliance cut the food into
small pieces.
Blending­
1­­
Place the device on an even and dry surface.
The non-slip feet
F
ensure the stability of the
appliance.
2­­ Make sure that the power cord is disconnected
from the power supply.
3­­ Remove the jug
A
from the motor housing
C
; to do this, turn the jug
A
in an anti-
clockwise direction and lift it upwards; Turn
of the chopping blade
B
and turn clockwise.
4­­
Now put the ingredients to be blended in the
jug
A
. The ingredients should only be about
2-5 cm long.
Notes
█
Add water to ensure the jug blender functions
smoothly.
OPERATION­ ______________________________