Grundig SI 3350, Инструкция по эксплуатации

Страница: 23 / 27

23 ENGLISH
OPERATION _________________________________
Setting the temperature
1 After plugging in the iron, set required iron-
ing temperature by turning the temperature
setting dial
B
to the appropriate position
(see the temperature and steam settings table
below).
2
The temperature of your appliance can be
increased by turning the temperature setting
dial
B
clockwise. For steam ironing tempera-
ture setting dial
B
should be in the range
between “eco” and MAX.
When setting the temperature of your appliance,
we recommend to consider the following table.
Fabric
Type
Temperature
Setting
Steam Setting
Synthetic
•
0 = without
steam
Silk •
0 = without
steam
Wool
••
eco or MAX
Cotton
•••
eco or MAX
Linen -
Jeans
MAX eco or MAX
3 In order to learn the ironing temperature to
be used, check the garment’s care label.
4
If you don’t know the fabric of your garment,
first iron a part that is not visible and deter-
mine a correct ironing temperature for it.
5
In order to prevent shiny stains that may form
on synthetic fabrics or silk, iron on the reverse
side of the fabric. Do not use the spray func-
tion in order to prevent the stain formation.
Steam ironing
1 Set the desired steam level by pushing the
steam setting knob
I
.
2 Set the required ironing temperature (see
chapter “Setting the temperature”). Make
sure that the temperature setting dial
B
is
within the range between “eco” and MAX.
When the thermostat warning light turns off,
the soleplate temperature has reached the
level to generate steam.
Vertical steam ironing
Note
7
Vertical steam ironing can be applied to
hanging curtains or clothes (suits, jackets and
coats).
Caution
7
Never direct the steam at people or pets.
1 Set the desired steam level by pushing the
steam setting knob
I
.
2 Hold the iron in a vertical position and press
the steam burst button
H
to steam iron your
curtains and your garments on the hanger.
Steam burst
1
During ironing, in order to remove the tena-
cious creases, you can gain strong steam by
pressing on the steam burst button
H
for 3-4
times with 5-second intervals.
2 When you start to iron, steam burst may not
emit in your first couple of presses. In order
to gain steam burst, the temperature setting
dial
B
should be at ••• or a higher level.
3 You can iron the creased parts of the gar-
ments with the steam power which is ob-
tained by pressing the steam burst button
H
during steam ironing. However if this process
is maintained without an interruption, water
may also come from the iron soleplate
D
along with the steam.