26
SEEN - SEEN A
Number of rings
This parameter enables you to set the number of times your telephone rings before the answering
machine answers a call. The number of rings can be set between 2 and 8.
You can also select the "
time saver
" mode. The "
time saver
" mode automatically determines the
number of rings: If there are no new messages on the answering machine, the number of rings will
be 4, otherwise the number of rings will be 2.
1.
Go to the menu "
ANS. MACHINE
"
"
tam settings
"
"
answer delay
".
2.
In the list, select the desired number of rings (between 2 and 8) using the
or
key
or the
"
time saver
" mode, press
.
Recording time of incoming messages
Define the maximum time a caller has to leave their message.
1.
Go to the menu "
ANS. MACHINE
"
"
tam settings
"
"
record time
".
2.
Choose the desired recording time (
60 s
,
120 s
,
180 s
or
unlimited
)
by using keys
or
,
then press
.
Remote access control
This function allows you to check your voice messages and change your answer machine settings
even when you are not at home.
Activate / Deactivate remote access
1.
Go to the menu "
ANS. MACHINE
"
"
tam settings
"
"
remote acc.
".
2.
Use
or
to select "
on
" or "
off
" setting.
3.
Press
key to confirm your selection. You will hear a confirmation tone.
By default, the remote enquiry function is activated. You should modify the remote
enquiry code (0000 by default).
It can be modified from the "
ANS. MACHINE
"
"
tam settings
"
"
change pin
" menu
(refer to the paragraph “Modify the remote enquiry code” page 27).
Remote access control
To remotely access your answering machine: dial your telephone number and wait for the answering
machine to come on. When your outgoing message is played, press
and enter your remote access
code (0000 by default).
If no key is pressed for 5 seconds, the answer machine will stop automatically.
