Grundig RCD 1460 DAB+, Руководство пользователя

Страница: 15 / 16

­15
ENGLISH
Troubleshooting
If a fault occurs, first refer to this information be-
fore you take the device for repair.
If you are unable to rectify the fault using the in-
formation given here, contact your local dealer
or service specialist.
Under no circumstances do not attempt to repair
the radio recorder yourself, as this would invali-
date the guarantee.
INFORMATION
­------------------------------------------------------------------------------------------------------------------
Problem Possible­cause Remedy
General­Information
No sound.
The volume setting is too low.
The headphones are connected.
The batteries are flat.
The batteries are incorrectly
inserted.
The mains cable is incorrectly
connected.
Adjust the volume.
Unplug the headphones.
Replace the batteries.
Insert the batteries correctly.
Connect the mains cable
properly.
The device does not respond
to button commands.
The device suffers malfunc-
tions during playback.
Static electrical discharge or
electrical fast transient (burst).
Switch off the device, discon-
nect the mains cable and
plug it in again after a few
seconds.
Remove all batteries.
Radio
Poor radio reception. Weak radio antenna signal.
Interference from electrical
devices such as televisions, video
recorders, computers, neon lamps
etc.
DAB/VHF (FM): tilt and turn
the telescopic antenna.
Keep radio recorder away
from electrical devices.
Disc
Playback will not start.
The disc is damaged or dirty. Replace or clean the disc.
The device skips tracks. A stored track memory is being
played.
The RANDOM function is acti-
vated.
Switch to normal playback or
delete the track memory.
Switch off the RANDOM
function.
CD-Rs or CD-RWs are not
being played back, or being
played back incorrectly.
The disc is faulty or the software
or hardware settings were incor-
rect during burning.
Check the components of
your CD burner / burner
software or change the CD
you are using.