Grundig RCD 1440 USB, Инструкция по эксплуатации

Страница: 13 / 19

27­
ENGLISH
CD­MODE
­________________________________________________________________
Playing­back­titles­in­random­order­
(Random)
1 In stop mode, keep pressing » MODE « until »
RND
«
appears in the display.
2 Press »
e
II « to start random playback.
– All tracks on the CD are played back once in ran-
dom order.
3 To terminate the function, press » MODE « again.
Creating­a­track­memory
You can create a track memory of up to 20 tracks for
the current CD in any order you choose and then play
them back in that sequence. A track may be stored
more than once. Program is only possible in the stop
position.
Selecting­and­storing­tracks
1
Press »
PROG/MEM
« to call up the function.
2 Select the track by pressing » DOWN­ « or » UP­ «.
3 Press » PROG/MEM « to save the track.
4 To store more tracks, repeat steps 2 to 3 .
Playing­back­a­track­memory
1 Start the track memory by pressing »
e
II «.
– Playback begins with the first programmed file or
track.
2
Press »
■/BAND
« to end playback.
3 To play the track memory again, press
» PROG/MEM « and afterwards »
e
II «.
Changing­the­track­selection
1 In stop mode, keep pressing » PROG/MEM « until
the number of the track you want to replace appears
in the display.
2 Select the number of the new track by pressing
» DOWN­ « or » UP­ «.
3 Press » PROG/MEM « to save the new track.
Adding­tracks
1 In stop mode, press » PROG/MEM « until the preset
number shown in the display is zero.
2
Select the number of the new track by pressing
»
DOWN­
« or »
UP­
«.
3 Press » PROG/MEM « to save the new track.
Deleting­the­track­memory
The device must be in the stop position.
1 Press » OPEN/CLOSE « to open the CD compart-
ment
or
press » ■/BAND « while programming.