Grundig Planixx CDP 4103 AS10, Руководство пользователя

Страница: 13 / 14

ENGLISH
25
Troubleshooting
If a problem occurs, first refer to this information before you take the device
for repair.
If you are unable to rectify the fault using the information given here, contact
your local dealer or service specialist.
Under no circumstances should you attempt to repair the device yourself, as
this would invalidate the guarantee.
INFORMATION
_______________________________________
PROBLEM
The device will not
switch on
Playback will not start
No display
Playback will not start
Playback is interrupt-
ed
No display
Playback does not
begin with the first
track.
No sound, poor
sound quality
POSSIBLE CAUSE
The batteries are incorrectly
inserted. Batteries are flat.
The »
HOLD
« switch is in the
»
ON
« position.
The mains adapter is not prop-
erly connected.
The CD compartment is not
properly closed.
Moisture has collected on the
lens.
The CD has not been inserted
correctly.
The CD is damaged or dirty.
The PROGRAM or SHUFFLE
function is activated.
The volume is turned right
down.
The earphones plug is loose or
not plugged in.
The earphone plug is connected
to the »
LINE OUT « socket.
REMEDY
Insert the batteries correct-
ly. Insert new batteries or
recharge them.
Push the »
HOLD
« switch
on the device or on the
remote control to the
»
OFF
« position.
Check the mains adapter.
Close the CD compartment.
Let the device stand for a
while in a warm room.
Insert the CD with the label
facing upwards.
Replace or clean the CD.
Switch off the PROGRAM
or SHUFFLE function.
Use »
VOLUME
g
« on
the device or on the remote
control to adjust the vol-
ume.
Check the connection.
Plug the earphones plug
into the »
PHONES « sock-
et.