14 ENGLISH
OPERATION _________________________
The power adapter has an automatic
100 - 240 V~, 50/60 Hz transformer
which works anywhere in the world.
This allows it to adjust to all interna-
tional AC voltages.
Shaving
1
Remove the plastic protective cap
I
.
Caution
■
The foils and blade blocks must
not be damaged. Replace any
damaged parts before shaving.
2
Plug the power adapter
K
into the
power adapter socket
C
and the
power adapter plug into the wall
socket.
3
Push the On/Off switch
B
to
switch on the appliance.
4
Shave with slow, gentle move-
ments against the direction of
beard growth. Hold the appliance
at a 90° angle to your skin. Make
sure both foils touch the skin.
Caution
■
Do not press too hard as you may
damage the foils.
5
After use, switch off the appliance
with the On/Off switch
B
, discon-
nect the plug from the wall socket
and put the plastic cap back on.
Trimming
Use the extended trimmer for longer
hair on your face and neck as well
as on the beard, moustache or
sideburns.
1
Plug the power adapter
K
into the
power adapter socket
C
and the
power adapter plug into the wall
socket.
2
Push the On/Off switch
B
to
switch on the appliance.
3
Push up the trimmer
D
completely
until it latches in.
4
After use, push the trimmer
D
back down.
5
Switch off the appliance with the
On/Off switch
B
and disconnect
the plug from the wall socket.
Hints and tips
■
Always pull the skin taut when
shaving difficult areas such as
your lower jaw.
■
Always cut against the natural
direction of beard growth.
■
In the case of thick or copious
beard growth which cannot be
removed by just one shave, do
one quick shave and then a more
thorough second one.
