ENGLISH 23
USE
___________________________________________________
Beard trimming
1
Press the
button to switch off
the appliance (level 0).
2
Remove the hair comb by press-
ing the
button and taking it
off.
3
Remove the cutting head for hair
and replace it with the cutting
head for the beard .
4
Put the beard comb
on.
5
Slide the comb with the inner
side grooves onto the side guide
rails on the appliance.
6
Press the switch
down and set
the cutting length (from 1 to 7)
(see the following table).
Observe the display
for the
comb positions.
7
Switch on the appliance with the
button and start trimming the
beard.
A
C
B
K
J
B
A
8
If required, set the speed to level
2 with the
button.
Note
7
Speed level 2 is a turbo level with
extra power for strong beard
hair.
Trimming lengths of the
beard comb (
)
Notes
7
If you use the appliance without
the beard attachment, the cutting
length is 1.5 mm.
7
The trim lengths given here
describe the remaining hair
length. All the lengths here are
approximate.
K
A
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
2 mm
5 mm
7 mm
10 mm
13 mm
15 mm
18 mm
02MC8641_en 03.12.2009 13:44 Uhr Seite 23
