ENGLISH
31
Automatic station search
1
Press »
TUNER/BAND
« to switch on the device.
– Display: »TUNER«, then the waveband and the frequency.
2
Select desired waveband (FM, MW or LW) with »
TUNER/ BAND
«.
– Display: »FM«, »MW« or »LW«.
3
Activate the station search by pressing »
TUNING
Ń Ľ
« on the device
until the frequency display changes to rapid run-through.
– The search stops when a programme is found.
4
To switch to manual tuning, press »
TUNING
Ń Ľ
« once on the device
briefly.
Manual station search
1
To move the frequency forward in steps, briefly press »
TUNING
Ń Ľ
«
on the device several times.
– The frequency changes in steps of 50 kHz.
Saving stations on station positions.
1
Select the desired waveband (FM, MW or LW) with »
TUNER/
BAND
«.
2
Press »
TUNING
Ń Ľ
« to tune to the station you want to store.
3
Briefly press »
PROGRAM/PROG.
« to activate the storage function.
– Display: the next free station position, e.g. »
02
«, »CH« flashes for
approx. 10 seconds.
4
Select the desired station position with »
MEM
Ń Ľ
« on the device or
with »
5a
« and »
s6
« on the remote control.
5
Press »
PROGR
« again to store the station.
– Display: »CH« and, e.g. »
40
«.
6
To store more stations repeat steps
2
to
5
.
Deleting individual stations
1
Select the station position to be deleted with »
MEM
Ń Ľ
« on the device
or with »
5a
« and »
s6
« on the remote control.
Note:
All station positions apart from »
01
« can be deleted.
2
To delete the selected station, hold down »
7
«.
– Display: »CH« and, for example, »
03
« disappear.
Note:
If no back-up batteries are installed and the device is disconnected from
the mains for a longer period of time, all the stored stations are deleted.
SETTINGS
______________________________________
FLAT
FM
87.6
5
MHz
TUNER
FLAT
CH
02
FM
88.8
MHz
TUNER
FLAT
CH
40
FM
88.8
MHz
TUNER
FLAT
FM
100.6
MHz
TUNER
FLAT
CH
37
FM
100.6
MHz
ɳ
TUNER
FLAT
FM
88.9
MHz
ɳ
TUNER
