ķ
8
How to proceed:
Select channel position 15.
Press the
m
button.
Follow the dialogue lines.
In the channel position data line, the letter C (for channel) is
highlighted in yellow.
Press the
]
button.
C changes to S (for special channel).
Press the
c
button.
The yellow highlight jumps to the channel entry position.
Press the buttons
0
and
8
.
S 08 appears in the channel position data line.
Press the
c
button twice.
On the picture screens appears in addition a list of the TV
standards which can be received and reproduced by the TV
set.
Press the
|
or
]
button until the indication SECAM L is
selected.
The unit tunes automatically to best picture quality.
Assigning the special channel S08 with the SECAM L stan-
dard to programme position 15 now is concluded.
It is also possible to assign a station name to this channel
position.For this, press the
O
button and follow the dialo-
gue line!
Press the
.
button to return to the television picture.
In difficult reception conditions it may be necessary to adjust
the picture by manual fine tuning.
Fine Tuning
Press the
m
button.
Press the
c
button until the highlight has reached the 00
position (for fine tuning).
Use the or
]
(63 steps) or
|
button (64 steps)
to adjust the optimum picture and sound quality.
It is also possibile to select a channel by means of the
manual channel search
.
To do this, press the
|
or
]
button. The channel search is
started and will stop at each channel which can be received.
PROG
1
z
C
06
00
PAL B/G
]|
Channel/S-channel
Ǹ Ƿ
Select position
O
Sel. station name
.
Terminate
Assigning Programme Positions
ATS euro plus – Update
If you have already found and stored in memory channels
with "ATS euro plus" and wish to start a new ATS euro plus
search (for example, when you have changed your location or
are connected to a cable TV system at a later date), press the
m
button for approx. 4 seconds. The following display will
appear on the picture screen:
You can select between "Update" and "Restart".
Select "Update" if new channels are offered,
and "Restart" in the case of relocation or connection to a cable
TV system.
For making further adjustments, refer to the indications given
in the dialogue line.
If you have selected "Update", the indications concerning the
llanguage and country are omitted.
The newly found channels are added to the station table and
marked in red.
You can "displace" the channels to move them to the desired
channel (programme) position.
If "Restart" has been selected, channel allocation will newly be
done. The existing channel allocation data is cleared (see also
pages 5 to 7).
Call up the memory function by pressing the
.
button and
store the new channel allocation by pressing the
O
button.
Assigning Programme Positions Manually
Example:
You wish to assign a programme which is transmitted on
special channel S 08 in SECAM standard to the channel posi-
tion 15.
Programming
I
Update
Restart
]|
Select
O
Confirm
.
Stop/cancel
I
euro plus
Auto Tuning System
Ǽ
P+
OK
P-
i
