Grundig LS 7140, Руководство пользователя

Страница: 20 / 133

20 ENGLISH
OPERATION ___________________________
Note
7
The appliance can be used on wet
skin in the shower and cleaned
under the tap (only in battery mode,
see section cleaning the shaving
head).
Rechargeable battery
operation
When operating the appliance with
the built-in nickel metal hydride battery,
only use the power supply unit J sup-
plied for charging.
Check if the type plate on the power
supply unit J corresponds to your
local mains supply.
1 Press the switch D , then push the
switch D downwards to turn off the
appliance.
2 Plug the power supply unit
J
into the
wall socket first and then the power
cord into the power cord socket
F
.
– During the charging process, the
charging indicator light
E
lights
up blue.
– Once the appliance is fully
charged, the charging indicator
light
E
disappears.
Notes
7
Charge up the batteries completely
(for at least 12 hours) before you
first use them or if you have not used
them for a long time.
7
The ambient temperature should be
between 5 °C and 40 °C.
7
Once you have used the appliance,
charging time is approx. 8 hours.
7
In its fully charged state, the appli-
ance can run for approx. 45 minutes.
It is not advisable to charge the bat-
teries after each use. Only charge
the batteries when they are com-
pletely discharged. This increases
their service life.
3
Pull the power cord out of the power
cord socket F and the power supply
unit J out of the wall socket.
Mains operation
Only operate the appliance with the
power supply unit J provided.
Check that the voltage indicated on the
type plate of the power supply unit
J
corresponds to your local power sup-
ply.
The only way to disconnect the appli-
ance from the power supply is to unplug
the power supply unit J .