12
ENGLISH
3
Select the preset with »
« or
»
PRESET–
«.
4
Press »
SET/TIME
« to save the station.
Note:
7
If stations are already stored on the
presets, they are overwritten when
new stations are stored.
5
To store more stations, repeat steps
1
to
4
.
Selecting stored stations
1
Select the preset with »
« or
»
PRESET–
«.
Adjusting the volume
1
Adjust the volume with »
– VOL +
«.
Setting the brightness of the
display
1
In Stand-by adjust the brightness in two
levels with »
DIMMER
«.
RADIO MODE
--------------------------------------------------------------------------------------------------------------
Antenna
For the best FM (UHF) reception it is
suffcient to align the wire antenna accor-
dingly.
Switching on/off
1
Switch the device from standby with
»
ON/OFF
«.
2
Switch the device to standby with
»
ON/OFF
«.
Searching for and saving ra-
dio stations – automatically
You can store 10 radio stations on pre-
sets.
1
Activate the station search by pressing
»
TUN+/HR
« or »
TUN–/MIN
« until the
frequency display changes to rapid
runthrough.
– The search stops when a station is
found.
Note:
7
To move the frequency forward in
steps, briefly press »
TUN+/HR
« or
»
TUN–/MIN
« several times.
The frequency changes in steps of
50 kHz, 100 kHz are shown; at 50
kHz the last digit of the particular
frequency indicator flashes briefly.
2
Press »
SET/TIME
« to activate the mem-
ory function.