Grundig HS 5520, Руководство пользователя

Страница: 7 / 9

10
ENGLISH
Cool shot
–
❄
: Interrupts heating and provides a cool air
flow
Changing the styling
attachments
1
Detach the attached styling attachment by
pressing on the catch (on the back of the appli-
ance)
and turning the hot air brush slightly
to the right.
2
Place another styling attachment on so that the
recess and the catch
(on the back of the
appliance) are in line and turn slightly to the
left until it clicks.
Note:
7
The diameter of the styling attachment influ-
ences the size of the curls. By using the styling
attachment ø 50 mm you can achieve an espe-
cially large volume for long hair.
Operation
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1
Thoroughly towel dry your hair after washing.
2
Plug the power cord into the wall socket.
3 Turn on the appliance with the switch and
set the required temperature level/blower level.
C
D
B
B
A
F
4
If necessary, interrupt heating by pressing and
holding down the
button (Cool Shot).
Note
7
Cool Shot interrupts heating and provides a
cool air flow. This allows you to fix your hair-
style better and more lastingly.
5
After use, switch off the appliance with the
switch and pull the plug of the mains
cable
out of the socket.
Note
7
Never wind the mains cable around the appli-
ance, because this can cause damage.
Please check the appliance and the cable regu-
larly for visible damage.
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing.
Remember to clean the air inlet grille
occa-
sionally with a soft brush to remove hairs and
dust.
G
D
C
G
HAIR STYLER HS 5520
_______________________________________