Grundig GWN 37230 S, Руководство пользователя

Страница: 71 / 84

71
EN
RO
End Time
With the End Time function, the
startup of the programme may
be delayed up to 24 hours. After
pressing End Time button, the
programme's estimated ending
time is displayed. If the End Time
is adjusted, End Time indicator is
illuminated.
In order for the End Time function
to be activated and the programme
to be completed at the end of the
specified time, you must press Start
/ Pause button after adjusting the
time.
If you want to cancel End Time
function, press On / Off button to
turn off and on the machine.
C
Do not use liquid detergents
when you activate End Time
function! There is the risk of
staining of the clothes.
• Open the loading door, place the
laundry and put detergent, etc.
• Select the washing programme,
temperature, spin speed and, if
required, the auxiliary functions.
• Set the end time of your choice
by pressing the End Time button.
End Time indicator illuminates.
• Press Start / Pause button. Time
countdown starts. “:” sign in the
middle of the end time on the
display starts flashing.
C
Additional laundry may be
loaded during the End Time
countdown period. At the
end of the countdown, End
Time indicator turns off,
washing cycle starts and
the time of the selected
programme appears on the
display.
When the End Time
selection is completed, the
time appears on the screen
consists of end time plus
the duration of the selected
programme.
Changing the End Time duration
Press the End Time button. Every
time the button is pressed, the
period will change in 3-hour
increments and the light of the
selected End Time will turn on.
Cancelling the End Time function
If you want to cancel the End Time
countdown and start the programme
immediately:
• Set the End Time from zero
(delete all end time displays)
or hold down the On/Off button
for 3 seconds. The End Time is
cancelled when the machine is
turned off and on again.
• Then, select the programme you
want to run again.
• Start the programme with the
Start/Pause button.
Starting the programme
• Start the programme with the
Start/Pause button.
• Programme follow-up light
showing the startup of the
programme will turn on.
C
Machine returns to OFF
mode when no programme
is started or no button
is pressed in 10 minutes
during the programme
selection. Display and all
indicators are turned off.
When you press On/Off
button, information about
the selected programme is
displayed.