Grundig GV 600 SV, Руководство пользователя

Страница: 15 / 40

Settings
ķ
14
Setting the time and date
Ń
!
If the recorder is disconnected from the mains
supply, the digital clock continues to run for
approx. 7 hours.
The time is not visible in the display.
Ń
!
If necessary, set the language for the user guide.
Follow the instructions in the chapter “Selecting the
language for the user guide” on page 35.
❒
Automatic updating
Switch off the recorder using the
¢
Ǽ
button.
The recorder now automatically updates the time.
The precondition is that a television station which
has teletext or PDC is set on programme position 1.
The recorder regularly repeats this update. This
also means that the recorder will recognise the
change from summer to winter time.
❒
Manual setting
Preparation
Switch TV set on.
Select the programme position for the video recor-
der (AV programme position).
Operation
Use the remote control buttons for this function.
Call up the info table using the
h
button.
When the recorder is used for the first time, the
» INSTALLATION « table appears immediately after
button
h
has been pressed.
Press the
h
once again and the »Info menu«
appears.
Use the
DC
buttons to select the » SET
TIME/DATE « line and call it up using the
G
but-
ton.
– The » SET TIME/DATE « table appears.
Enter the time as a four-digit number using the
numbered buttons
1
…
0
.
Use the
D
button to select the » DATE « line and
enter the date as a six-digit number using the num-
bered buttons
1
…
0
.
Store entry using the
G
button.
5
4
3
TIME: 20:15
DATE: 19.08.94
– – – – – – – – – – – – – – – – – – –
ļ Ļ
0-9 OK i
2
Ǻ
1
Ǻ
2
1
Ǻ
1
Deleting the data of a programme
position
❒
Preparation
Switch TV set on.
Select the programme position for the video recor-
der (AV programme position).
❒
Example
Use the buttons on the remote control for this
function.
Call up the info table using the
h
button.
Select the » INSTALLATION « line using the
DC
buttons and call it up using the
G
button.
Use the
DC
buttons to select the » TV STATION
TABLE « line and activate it using the
G
button.
– The » TV STATION TABLE « appears and the first
programme position is marked.
Select the desired programme position using the
DC E F
buttons.
Delete the data line using the ¢
CLEAR
button.
– The following TV stations move forward by one
position.
End the setting using the
h
button and the ¢
Ǽ
button.
6
5
4
3
2
1
Ǻ
2
1