PREPARATION
PREP
AR
TION
2.In a short while you will see the TV programmes briefly as each channel is
received and stored in the memory. After analogue stations have been
located and stored into the memory,the digital tuning scan will
commence. You may be prompted to start the Digital tuning scan. Press
the OK button to start the scan. When APS is completed BBC1 digital TV will
show, press CH+/- buttons to view the other channels stored.
To view analogue or digital TV press INPUT button and use the up /down
arrow buttons to select DTV or TV and then Press the OK button.Change
channels by pressing the CH +/- buttons.
To power off press the POWER button, the green light will change to red.
Selecting a INPUT
Press the INPUT button to display the function required (TV/AV).Using the arrow
buttons on the remote highlight the function required and press the OK button to
select the function.
Select TV Channel
Press the CH.+/- button on the remote control and the CH.+/-button on the LCD
TV to change the TV channels.
You can directly select the TV channel required by pressing 1,2 or 3 etc on the
remote button pad.
Adjusting the Volume
Press the VOL. +/– button on the remote control or the VOL. +/- button on the
LCD TV to adjust the volume.
To Mute the Sound
Press MUTE and the sound cuts off.
To turn mute off, press the MUTE button again, or simply press the VOL +/-button.
Sleep Timer
Press the SLEEP button continuously to select the sleep timer or turn the sleep
timer from the OFF,15,30,60minutes; when the LCD TV has reached the set time,
it will automatically turn off. If the TV has no INPUT signal, it will automatically
power down to standby after 15 minutes.
