The Power button on the right side of the front panel and also on the remote control is only used for powering up and
switching the TV to standby mode, it does not disconnect the device from the mains supply.
To completely disconnect the main voltage, please switch off the power switch on the rear of the TV, or
remove the power plug from the socket.
PREPARATION
PREP
ARA
TION
AC POWER
SWITCH
PC AUDIO IN
PC/VGA IN
AC 230V~
50Hz
AC POWER
SWITCH
VHF/UHF IN
Make sure the power
switch is switched off.
Unplug from
a wall outlet
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Aerial Connection
The aerial requirements for Digital TV reception are more important than those for Analogue TV
reception. For this reason, high gain digital TV aerial must be used.
Connecting a TV Cable or an Aerial
POWER
AC 230V~
50HZ
