background image

24 

Dryer / User manual

6.5 Auxiliary functions

Dryness level

Dryness level button is used for adjusting to 

desired dryness. Program time may change 

depending on the selection.

You can activate this function only 

prior to start of program.

Wrinkle prevention

You can turn on and off the wrinkle prevention 

function by pressing the wrinkle prevention 

selection button. If you will not take the 

laundry out immediately after the program has 

completed, you may use Wrinkle prevention 

function to prevent wrinkling of your laundry. 

Audible warning 

Drying machine makes an audible warning 

when the program is completed. Press the 

“Audible Warning” button if you do not want 

audible warning. When you press the audible 

warning button, the light goes off and it does 

not sound when the program is completed.

You can select this function before 

the program starts or after the 

program starts.

Low temperature

You can activate this function only prior to start 

of a program. You can activate this function 

if you want to dry your laundry at a lower 

temperature. The program duration will be 

longer after it becomes activated.

End time

You can delay the end time of the program up 

to 24 hours with end time function. 

1. Open the loading door and place the 

laundry.

2. Select the drying program.
3. Press the End Time selection button and 

set the delay time you wish. End time LED 

turns on. (When pressed and hold the 

button, End Time proceeds non-stop).

4. Press the Start / Stand-by button. End 

Time countdown begins. The “:” sign in the 

middle of displayed delay time flashes.

You can add or remove laundry 

within end time. Displayed time is 

the sum of normal drying time and 

end time. End Time LED turns off at 

the end of countdown, the drying 

starts and the drying LED turns on.

Changing the end time

If you want to change the duration during the 

countdown:
Pause the program and Turn the On/Off/

Program Selection button and cancel the 

program. Select the desired program and 

repeat the End Time selection.
Cancelling the end time function
If you want to cancel the end time countdown 

and start the program immediately:
Pause the program and Turn the On/Off/

Program Selection button and cancel the 

program. Select the desired program and press 

the “Start/Pause” button.

Drum Light

You can turn on and off the drum light by 

pressing this button. The light turns on when 

the button is pressed and turns off after certain 

time.

6.6 Warning indicators

Warning indicators may vary 

depending on the model of your 

drying machine.

Filter cleaning

When the program is completed, the warning 

indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the program 

continues, the warning indicator starts flashing 

and the machine goes into stand-by. In this 

case, empty the water tank and start the 

program by pressing the Start / Stand-by 

button. Warning indicator turns off and program 

resumes.

Содержание GT 541023 CW









































Отзывы: