ENGLISH
20
OPERATION
------------------------------------------------------------------------------------------------------------------------------
7
Disconnected the bluetooth on the smart phone
to switched off the bluetooth connection.
Note:
7
Bluetooth connection range in 10 meters
7
The model ''Grundig Soundbar 2.1'' in your
device was not deleted.
7
In bluetooth mode, »
e
II
«, »
«, »
«, »
+
«,
»
–
« etc. are also active.
Grundig Soundbar 2.1
Remote control operation
1
Insert the batteries into the remote control.
2
Point the remote control at the remote sensor on
the front panel.
3
The sound base is in searching bluetooth signa
status.
4
The remote control works within a distance of
about 8 metres from the sensor and within an
angle of about 30 degrees from the left and
right side.
Battery installation
1
Remove the battery compartment cover on the
back of the remote control.
2
Load one AAA/1.5V battery into the battery
compartment making sure that the battery have
been inserted with the correct polarities match-
ing the s, - as indicated inside the bat-
tery compartment.
3
Replace the cover.
Note:
7
Remove the battery when you do not intend
to use the remote control for a long time.
7
Weak batteries can leak and severely dam-
age the remote control.
7
The battery must not be exposed to exces-
sive heat source, such as sunshine, fire or any
other things like that.
7
Be environmentally friendly and dispose of
batteries according to your government reg-
ulations.
