background image

DISHWASHER / USER INSTRUCTIONS

35 / 43 EN

Troubleshooting

Dishes are not dry at the end of cycle

•  Dishes are not placed orderly in the machine. >>> Place your dishes in a way that no 

water will accumulate in them.

•  Rinse aid is not sufficient.  >>> Check the rinse aid indicator and add rinse aid if 

necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the 
machine.

•  Machine is unloaded right after the programme is over. >>> Do not unload your machine 

right after washing process is completed. Slightly open the door and wait for evacuation 
of the steam inside for a while. Unload the dishes after the pieces cool down to a 
touchable level. Start unloading process from the lower basket. Thus, dropping of water 
remained on a piece at upper basket onto the pieces at lower basket is prevented.

•  Selected programme is unsuitable. >>> Since rinsing temperature is low at programmes 

with short duration, drying performance will also be low. Select programmes with longer 
duration for a higher drying performance.

•  Surface quality of the kitchen utensils is deteriorated. >>>  Desired washing performance 

can not be obtained on kitchen utensils with deteriorated surfaces and it is not suitable 
to use such utensils in terms of hygiene as well. Also, water can not flow easily on 
deteriorated surfaces. It is not recommended to wash such kitchen utensils in dishwasher.

C

It is normal that drying complaints can be experienced with Teflon kitchen 
utensils. It is associated with the structure of Teflon. Since the surface tensions of 
Teflon and water are different, water droplets will remain as beads on the Teflon 
surface.

Tea, cafe or lipstick stains remain on dishes.

•  Selected programme is unsuitable. >>> Select a programme with a higher temperature 

and cycle time.

•  Surface quality of the kitchen utensils is deteriorated. >>>  Tea and cafe stains or other 

dye spots may not be cleaned in dishwasher when they have penetrated in deteriorated 
surfaces. Desired washing performance can not be obtained on kitchen utensils with 
deteriorated surfaces and it is not suitable to use such utensils in terms of hygiene as well. 
It is not recommended to wash such kitchen utensils in dishwasher.

•  Detergent is stored under unsuitable conditions. >>> If you are using powder detergent, 

do not store the detergent package in humid places. Keep it in a closed container if 
possible. For ease-of-storing, we recommend you to use tablet detergents.

Lime traces remain on dishes and glassware gains a misty appearance

•  Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if 

necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the 
machine.

•  Water hardness setting is low or salt level is insufficient >>> Measure the hardness of the 

supply water appropriately and check the water hardness setting.

Содержание GNV22620













































Отзывы: